| |
|
Fluke 192 Scopemeter
Speed, performance and analysis power! The ScopeMeter 192 high-performance oscilloscope with 60 MHz bandwidth, 2.5 GS/s real-time sampling and a continuous recording feature of 27,500 points per input.
This lab scope is not for every technician! The Fluke 192b is an industrial lab scope. It does not provide any presets for automotive testing. Use the 192b scope for automotive testing only when the following conditions can be met:
• You have test leads appropriate for automotive testing.
• You enjoy using lab scopes. It's not just a tool, it's fun and cool.
• You have the extra time to learn a full-featured tool.
Features:
• Dual-input - 60 MHz bandwidth
• Up to 2.5 GS/s real-time sampling per input
• Large, high-resolution color or monochrome screen
• Connect-and-View™ automatic triggering and a full range of manual trigger modes
• Fast display update rate for seeing dynamic behavior instantaneously
• Automatic capture and replay of 100 screens
• 27,500 points per input record length using ScopeRecord mode
• TrendPlot paperless chart recorder for trend analysis up to 22 days
• Up to 1000 V independently floating isolated inputs
• Vpwm function for motor drive and frequency inverter
applications.
• 1000 V CAT II and 600 V CAT III safety certified
• Five hours rechargeable Ni-MH battery pack
|
|
|
|
| |
|
CAN Training Chrysler Details
Go beyond the information in the service manual. See where to test with the actual scope patterns you should get. The diagnostics will help you identify the problem. The diagnostics have clear test instructions in a video format so you don't have to read thousands of pages of instruction that are sometimes confusing and hard to understand. Covers: CAN, CCD, SCI, PCI, and MUX.
|
|
|
|
| |
|
EScan PC Based Drivability Scan Tool ($795.00)
The EScan (Patent Pending), is a PC based drivability tool with Sharp SHOOTER™ automated troubleshooting capabilities. It connects and reads generic OBDII scan data from ISO-9141-2, KWP2000, J1850 (PWM and VPM), and CAN bus types...CHECK IT OUT!
|
|
|
|
| |
|
EScope ($3995.00)
PC Based 8 Channel Oscilloscope/Meter/Function Generator
>+/- 10 or +/- 200 Volt Range on all Eight Channels (Built in 20X Dividers!)
>10 Mega Ohm Input Impedance on all Eight Channels for +/- 10V Range
>1 Mega Ohm Input Impedance on all Eight Channels for +/- 200V Range
>12 Bit (0.024%) Resolution on all Eight Channels
>Large 1024x768 Pixel (XGA) Viewing Area with Large Colored Traces
>Data Can be Saved to Text File for Future Retrieval
>Data Can be Saved to JPEG Image for E-mailing or Documentation
>Web Enabled for Remote Monitoring on LAN or Internet
|
|
|
|
| |
|
Emission 5 Gas Analyzer ($5495.00)
The Emission is a five-gas analyzer that can be used by itself or on a PC by connecting it to the serial port to allow real-time graphing of signals. Finds: no start, hand start, EVAP, and drivability problems fast... CHECK IT OUT!
|
|
|
|
| |
|
ATS Diagnostic Stand ($5495.00)
The ATS Diagnostic Stand integrates all automotive Test Solutions diagnostic tools into one convenient stand that can roll around the shop floor. The stand has a overhead boom that brings the diagnostic cables directly over the automobile to make the connections very fast and neat. This avoids trip hazards and keeps cables clean and organized. The stand holds an optional printer to connect to the computer...CHECK IT OUT!
|
|
|
|
| |
|
ETrainer "Car in a Box" ($7995.00)
The ETrainer® (Patent Pending), is a revolutionary automotive engine simulator that mimics hundreds of faults, failures, problems, and resets. The ETrainer is a complete automotive electrical training system with light circuits, relay motor circuits and an engine simulator! ETrainer is equipped with the revolutionary Faultmaster technology that introduces faults, failures, and problems into all circuits. Faultmaster technology is able to give a technician the equivalent of many years of experience in a short time. Hands-on classroom training using the ETrainer will produce technicians who have a clear and concise understanding of both today's and tomorrow's complicated computer circuitry. These technicians will then be able to diagnose problems from the very basic to the most challenging! ETrainer trains mechanics to diagnose and repair the electrical systems of ALL of today's automobiles... Not just specific makes...CHECK IT OUT!
|
|
|
|
| |
|
Pressure Transducer Kit and Pressure Transducer Kit for EScope Limited and Pro
This Pressure Transducer(Patent Pending), kit has the resolution and accuracy to read -30hg to 5000psi. Turns your scope or meter into an advanced diagnostic system. Quickly finds misfiring cylinders, running compression problems, camshaft timing problems, blown head gasket, sticking piston rings, fuel pressure problems and much more...CHECK IT OUT!
|
|
|
|
| |
|
EFlash Programmer
The EFlash Programmer is a PC based J2534 Reprogrammer that allows you reflashing capability that was previously DEALERSHIP Level. Fully complies with SAE J2534-1 and supports many J2534-2 extensions. Upgradeable for the future...CHECK IT OUT!
If you are interested in a make-specific EFlash Programmer, check out the EFlash Limited Programmer
|
|
|
|
| |
|
TSD450 Automatic Transmission Fluid Exchanger with Dipstick Mode
Unique Combo Unit Connects to Cooler Lines or Through Dip Stick Tube...
• Fully automatic operation allows easy revenue and profit without additional time investment
• New 2.5 gallon per minute pump ensures rapid exchanges
• Superior filtration for longer machine life and less downtime
• Portable, fully interactive. Works with vehicle's 12-volt battery for easy fluid exchanges
• Advanced features mean faster fluid exchanges, for greater productivity
• Full exchange or fast dipstick process (your choice)
|
|
|
|
|
