Driveability Case Studies II: The Next Generation
Instructor: David Crippen

ECUs work in concert to control multiple vehicle systems. Simply scanning only one computer does not always yield the necessary information to make a diagnosis. In this seminar, we discuss the importance of interrogating the entire vehicle network to gather information from interrelated systems. In this course we cover actual vehicle drivability case studies including Emission related problems, Air Fuel Sensors, and CAN networking Systems. Live data captures using scan tool and lab scope diagnostics will be covered.

Intermittent Problem Detection
Instructor: Bill Fulton

Using fourteen different case studies, Bill Fulton covers how to find out if we are dealing with intermittent problems with BUS circuits, fuel delivery, mechanical integrity, electrical, ignition, and PCM initialization.

Electrical Diagnostics Part 1
Instructor: G "Jerry" Truglia and Rich Peterson

G Truglia and Rich Peterson help you maximize your meter and labscope usage, cover battery charger essential, and walk through real electric problems.

Cam and Crank Waveform Diagnostics
Instructor: John Thompson

Learn important facts about Cam/Crank Sensors including how to easily diagnose sensor related no starts, stall and drivability concerns, jumped timing chains and belts, how to properly time Ford Cam Synchronizers, the relevance of code specific information, and more.

MAF Diagnostics
Instructor: John Thornton

Covers diagnosing GM, Ford, Nissan, Toyota, and VW MAF failures and how to diagnose vehicles using a MAF sensor. Gas analyzers, fuel trim graphing, MAF voltage/frequency values, VE calculator, and engine load PID are all covered..

Everything You Wanted To Know About a Scan Tool
Instructor: John Anello

Covers understandng scan tool data, factory enhanced information, recoding, recalibrating, reconfiguring, reinitializing, and relearning onboard controllers.

Top Ten Drivability Case Studies
Instructor: Doc Nall

Doc Nall's January 2009 seminar, focusing on vehicles with drivability problems that are particularly rare and not typical in the repair industry. Doc connects theory to practice every step of the way.

Getting the Most Out of Your Labscope
Instructor: Jerry "G" Truglia

A previously "lost" TST seminar from November 2006, Jerry Truglia covers the following: How to Connect, Display, and Interpret Labscope Readings on all major brands of Labscopes, Scope Essentials, Controls, Connections, Channels, Coupling, Time and Voltage Settings, Transducers, and Major Signal Types. All Labscopes are covered in this course including EScope, Fluke, OTC, Pico, Snap-On, and Tektronix..

Diagnosing and Understanding Hybrid Electric Vehicles
Instructor: Jerry "G" Truglia

A previously "lost" TST seminar from October 2007, Jerry Truglia covers all the hybird basics including safety, batteries, and maintenance. The seminar is a good starter for technicians that have the ability to repair standard vehicles and need to transfer over their skill set to the growing amount of hybrid vehicles.

The Profitable Guide to DSO Diagnostics
Instructor: Bill Fulton

Bill Fulton will give you the tips you need to maximize the usefulness of your labscope in order to save you time and money.

Diagnostic Soup
Instructor: John Anello

John Anello's amazing case-studies seminar covering an array of electrical, computer, and hybrid system problems that made September 2008's TST meeting our biggest yet.

Body Module Diagnosis with Rich Peterson
Instructor: Rich Peterson

Rich Peterson teaches technicians at June's TST seminar on how to diagnose several body modules.

Go With the Flow! Advanced Fuel System Diagnosis
Instructor: John Thompson

John Thompson of Thompson Automotive Labs demonstrates that the cause of a lot of problem cars can simply be from the fuel system. Learn how to diagnose the fuel system by understanding it.

New Diagnostic Technology with Bernie Thompson
Instructor: Bernie Thompson

Bernie Thompson returns to inform fellow TST technicians of the latest methods of using different forms of technology to diagnose age old problems.

Electric Throttle Control
TST's Big Event June 2007
Instructor: John Thornton

John Thornton of Pro-Tech Auto Repair and Autotrain Inc. informs attendees of the latest Electric Throttle Control data. John mixes real world problem solving with diagnostic techniques that help diagnosis and understanding of system operation.

AC Service 2007: Major Changes are Coming
TST's Big Event June 2007
Instructor: Peter Coll

Peter Coll of Neutronics Inc. uses the latest industry information to explain the current state of R134a, alternative refrigerants arriving in the near future, problems associated with AC services from amateur mechanics, and much more.

Transmission Driveability
TST Seminar April 2007
Instructor: Wayne Colonna

Wayne Colonna, president of ATSG, teaches attendees to repair Dodge RE transmissions along with many silver bullet solutions. Stop sending your customer's vehicle back and forth from the transmission shop.--THIS DVD IS NO LONGER AVAILABLE--

Mode 6
TST's Big Event March 2007
Instructor: Doc Nall

Dr. Norman "Doc" Nall is a charismatic instructor and trainer with over forty years of experience. Mode 6 differs for each and every make of vehicle. Doc Nall teaches the difference between the many types of Mode 6 found in vehicles and how to use this data to diagnose problems in these vehicles.

Diagnostic Skills Beyond the Scan Tool
TST Seminar September 2007
Instructor: Mac VandenBrink

Mac VandenBrink informs fellow technicians of how to diagnose and analyze (not memorize) engine problems.

Fuel Injection
TST Seminar November 2006
Instructor: Bernie Thompson

Bernie Thompson of ATS informs fellow technicians of the latest methods of fuel injection diagnosis.

CAN Data
TST's Big Event March 2007
Instructor: Dave Hobbs

Dave Hobbs of Delphi has extensive experience in automotive-electric business and provided attendees with the latest information on CAN Data. Every technician should know more about GM Serial Data Buses and BCM's.

TST Mini-Seminars

Getting To Know the MODIS Scan Tool Instructor: "G" Jerry Truglia Coming soon.	Advanced Electrical Troubleshooting Instructor: "G" Jerry Truglia This webcast will cover using a DMM/DVOM meter and labscope to test circuits, sensors, and actuators. During the webcast we will connect to circuits with leads and an amp clamp to troubleshoot electrical circuits and components..
Getting To Know the MODIS Labscope Instructor: "G" Jerry Truglia Coming soon.	Current Ramping Instructor: "G" Jerry Truglia This DVD is designed for techs who need to know how to set up their low amp / current probes on labscopes AND use their Power Probe. We demonstrate how to set up your amp / current probe on a labscope so you can measure current on injectors, fuel pumps and ignition coils. In the DVD we will display sample waveforms so you can determine and interpret common DC current waveforms. We use the two most common low amp / current clamps, the Fluke 80i-110 and the PDI CA-60 along with the Modis lapscope and the Fluke 196 (the Fluke 97 and 98 are very similar to the 196) labscopes.
Divide and Conquer--Diagnostic Strategies Instructor: Pierre Respaut Pierre informs you what to look for first, what to do next, and what we should expect to find in certain classes of vehicles. You will learn methods for dividing problems for efficient diagnostics.	Scan Tool and Mode 6 Instructor: "G" Jerry Truglia Jerry Truglia discusses how to use Mode 6 and your scan tool to diagnose and repair vehicles.
Evap Case Studies Instructor: Thomas Barrone Thomas Barone discusses evap problems on different vehicles, including diagnosis and repair..	BMW ABS Controller Failures* Instructor: Pierre Respaut Pierre Respaut discusses several silver bullets for modern BMWs, with emphasis on ABS controller failures. *Formerly titled "BMW Tips and Troubleshooting."
Electrical Troubleshooting: Case Studies and High Voltage Instructor: Rich Peterson Rich Peterson discusses how to use electrical techniques to diagnose problem vehicles.	Driveability Case Studies Instructor: John Anello John Anello discusses driveability problems on different vehicles, including diagnosis and repair.

Copyright © 2010 Technicians Service Training. All rights reserved